Blog
Tee D 3" Pipe Fitting Molds
Sinomould specializes in R&D and manufacturing of plastic pipe fitting moulds. This 3″ tee pipe fitting mould (Tee D 3 inch pipe fitting mould) is a commonly used injection mould for water supply and drainage pipeline systems. The 3″ tee pipe fitting mould is compatible with PPR, PVC, HDPE and other plastic materials. Featuring reliable structure and smooth demoulding, it supports mass production of 3-inch tee fittings for domestic water supply and municipal drainage projects. We can customize 3″ tee pipe fitting mould with different cavities and hot runner solutions according to your drawings.
Standard Centrifuge 3" Tee Pipe Fitting Mould
The table below shows the basic technical parameters of the standard 3″ tee pipe fitting mould. Custom modification is available.
| Mould Cavity Steel | DIN 1.2316, S136, 718H | Recommended Injection Machine | 350T – 800T |
|---|---|---|---|
| Mould Core Steel | DIN 1.2316, S136, P20 | Plastic Material | PVC (rigid / lead-free), PP, PE |
| Mould Base Standard / Steel | LKM标准 LKM Standard / S50C, S45C | Ejection System | Ejector plate + evenly distributed pins + optional air assist |
| Sliders, Inserts, Lifters Steel | High-strength tool steel, nitrided | Injection Process | Precision injection, mould temperature control ±2°C |
| Number of Cavities | 1×1, 1×2 | Injection Cycle Time | 45–90 seconds |
| Hot Runner System | Hot runner + localised cold runner (PVC-specific) | Mould Manufacturing Lead Time | 45–70 days |
Key Quality Points of Tee D 3" Pipe Fitting Molds
A qualified 3″ tee pipe fitting mould must guarantee consistent dimensions, precise sealing surface and stable long-run production:
- Strict control of concentricity and flatness of three ports of the tee fitting to prevent leakage, which is the key quality standard of 3″ tee pipe fitting mould;
- Balanced runner and gate design to avoid short shot, sink mark and weld line, ensuring pressure resistance of tee fittings;
- Reasonable clearance between slides to prevent flash and stuck during continuous running;
- Mirror polishing on cavity to get smooth inner surface of pipe fittings and reduce water flow resistance;
- Well-distributed cooling channels for balanced temperature control and less product warpage.
Precision Machining Highlights for Tee D 3" Pipe Fitting Molds
During machining of the 3″ tee pipe fitting mould, we strictly control every process to reduce trial mould risks:
- Carry out DFM analysis first to evaluate core-pulling structure, gate location and cooling layout, confirm the feasibility of the 3″ tee pipe fitting mould;
- CNC finish machining + EDM for cavity and core to achieve high precision for complex tee forming surface;
- Fitting and grinding for slides and side core-pulling parts one by one to ensure smooth movement;
- Precise heat treatment for uniform hardness, preventing deformation and wear;
- Pre-assembly inspection after mould assembly to check mould opening/closing and core stroke before mould trial.
If you are looking for high-quality 3″ tee pipe fitting mould, please send your tee fitting drawings to Sinomould. We will provide professional mould solution, quotation and mould trial service for you.