Sino Mould specializes in the production of various plastic paint bucket mould. We have made more than 1,000 pairs of bucket molds over 20 years. With rich manufacturing experience in the design and production of bucket molds, such as: round buckets Moulds, square bucket moulds, oval bucket moulds. And the capacity ranges from 1L, 3.6L, 18L to 20L. The following are the specifications of the 18L paint bucket mould and lid mould manufactured by us.
And we can also help you set up the bucket production line—Custom Design Injection Molding Line Set Up.
1. Mold core and cavity material: 1.2344 mold steel of HRC42-44 or H13 mold steel.
2. The core and the edge of the cavity are inserted with BeCu, which can achieve the best cooling effect under high-speed injection.
3. Mold base material: use standard mold bases such as LKM.
4. Our brand Anole hot runner system comes with a mold temperature controller, which can save materials and reduce cycle time.
5. The inductive limit switch can accurately control the ejection distance.
6. Hasco standard, cooling water nozzle type Z801 / 19.
7. Mold design with excellent air venting system.
8. The paint bucket mold with IML system.
The wall thickness of the paint bucket produced is uniform under the strict quality control. We will also do sealing test, stacking test, and drop test on the samples. When all these meet the requirements, inspect the mold quality. After all are qualified, the mold will be shipped.
Welcome to contact us with your intention paint bucket mould, we are committed to providing you with the best suitable production line solution.
