We are different plastic injection molds supplier and the company, as we know,
Before manufacturing the production, the first step is to install the molds on the machines. The following is the way to install the molds:
1.Checking Clamping Plate Size & Tool Thickness under Tool-closing & IMM Conditions.
2.According IMM Tech-data, finishing installation of tool, then quick setup of clamp required or fixation manually.
3.Connecting cooling,heating,electric & Hydraulic System under tool drawings, then checking & ensuring all pipes and wires on safe & proper conditions.
4.Opening cooling tap first, then starting heating system according H.R .Instruction. (for sequential valve Runner, 15 minutes cooling band required at least.)
5.Disassembling all Counter-locks.
6.Setting IMM Parameter as ATTACH 1st, then opening tool under Tool Running Sequence when reasonable VALUE on steady production level.
7.Cleanness: cleanout of antirust with soft-cloth & assisted cleanliness liquid (pure and W/O chemical molecule)
8.Before production, tentative and repeated testing in Tool Movements is necessary, and attention to Injecting Gate, Slider/core pulls, Lifter & Ejection System running is necessary & serious,
9.Pre-production must ensure non-dust in mold & w/o injected plastic liquid or blocks affixing Gate.
10.the amount of dosage should increase by degrees.
11Reasonable adjustment of Parameter & relevant equipments are allowed according to actual products and IMM Function.
12. Confirming Injection Parameter when reach on relative steady-running, then operating tool under Semi-automatic or Automatic. The above is the way to install the molds.
Stephanie
Skype: sinomould-15
E-mail: sino1508@sinomould.com/moldingservice@dekumar.com
