To make a good Industrial waste bin mold, you need to know the technical points and the quality points of a waste bin mold as follows.
Good plastic material filling system, you need a very special hot runner system, because if you need to molding a durable plastic Industrial waste bin, then you need to use low MFI HAPE, such as MFI=5 or even MFI=4…
Injection must be very well balanced for even filling of the HDPE and to eliminate core movements. The thickness differences between the side walls of the BODY will be not more than 0.16mm.
You need to make the cooling the best optimal effect, for durable plastic Industrial waste bin mold, you need to use Copper Beryllium-Alloy and so is the top side of the part zones, for quickest possible cooling, and with excellent cooling water channel design.
For all kind of mold, the high speed running is based on the mold is precised machining, the movement parts with accurate guided…otherwise, there is none possibility for a mold high speed performance.
Please come to SinoMould, in SinoMould you will know more about mold injection.
Ms Charlene
Skype: sino.group03
MSN:sino-pf@live.cn
Mail: office1@cnmould.com
Skype: sino.group03
MSN:sino-pf@live.cn
Mail: office1@cnmould.com
