5 gallon cap mould

In the packaging mold types, there is a typical cap molds we can discuss it. It is 5 gallon cap mould. As a professional mould maker, it is the easiest cap mold we can make. But if you would like to fully satisfy your customer, you need pay attention to the below things:

1st, cycle time is a very important factors which customer care, because it is related to their production efficiency. How to achieve fast cycle time? Optimal mold structure design and cooling system is the key point. Sure, good performance injection machine is necessary.

2nd, for customer, a good cap mold must have long working life time under the high speed molding condition. To achieve this, you must use high quality mold material and spare parts. Also keep the mold structure as simple and easy for customer maintenance in their own factory.

3rd, how can you make this cap mold with short delivery time? Without high precision tooling machine and tooling quality, you will spend more time to modify and adjust the mold. On the contrary, if you tool the mold very well in one time without any precision issue, then you saved a lot of time. Besides, reasonable tooling procedure can shorten the whole tooling time.

4th, match with the bottle neck. In fact, normally if the above requirements can be realized perfectly, then it is no problem at all regarding to the match issue.

Above information we mainly talk about the plastic 5 gallon cap mold technical points. And for some customers, they don’t have experience to produce the plastic 5 gallon cap, we also can share the other information like the key points regarding to the part design, and the injection molding technologies( the machine setup), even to setup a new factory to produce the plastic cap. Welcome your consult.

Edited by Wendy Lu

Wechat/whatsapp: +13867653757

Email: export2@sinomould.com