Plastic rattan gas assisted chair design has become more and more popular; so many customers are looking for a good plastic rattan gas chair mould maker to invest this project. As a professional plastic daily-use rattan gas assisted chair mould manufacturer, we can offer you the whole production line including the chair mould, plastic injection machine, auxiliary machine, gas assisted equipment....What’s more, we can send the engineer team to your factory to offer you the best suggestion and do the training for your employees.

For the rattangas assisted chair mould, below are some main points you should pay attention:

1. Air trapping

Mostly onthe rattan chair back place especially the forming place, there will be a problem for the air trapping, we will make inserts here to for better air venting.

2. Surface scratch

Since the chair surface is with the rattan surface finish, when finishing the injection, it is easy to have the scratch problem; you need to add the demolding angleproperly.

3. Seat place

If the customer does not agree to add the demolding angle, it needs the collapsible system, but with this collapsible system, the mould running will be not so stable and the life will not so long.  If the customer  chooses to do the demolding angle, the seat place will have a splitting line on the surface, so we need to check it well with the customer and choose most way to make the moulds.

4. Parting line

When the mould is finished, you need to pay attention to the parting line on the rattan chair handle place. The half  line should be good, not hurting people.

5. Gas assisted

If  the customer needs the rattan chair with gas assisted, you need pay attention tothe gas blowing time, gas volume, which will affect the product at some extent.

6. Robot

If this project needs to be with the automatic robot, we need pay attention to the fitting between the product and the robot. Since the pattern is rattan, it isnot so easy for the robot to take the product and also easy to scratch the product. So it is better to adjust the robot with chair before shipping.

Now we have a ready Rattan gas assisted chair production line with DKM1600T & for saleswith big discount. it is made for another customer, but he has some problem withfinance because of the exchange rate in this country. We are planning to sell this first and will remake a new one for this customer when he is ready. it is a line with gas assisted chair moulds, 1600T servo motor injection machine, robot with conveyor and gas assisted injection equipment. Welcome for inquiry!

Martina

Skype:sinomould-17

Email:plast@sinogroupe.com

Phone/what's APP: 0086 15215807221