Sino automotive Co.,Ltd is a brother company of SHG,which is specialized in automotive parts mould and auxiliary parts mould.The bumper mould is the main products in the side,we are full experienced bumper mould maker.

We use the best mould steel as the main steel ,usually,the mould of cavity and core are use P20 or 718,we use the cavity mould as Thyssen KrupDIN1.2738 and the core mould as Thyssen Krup DIN 1.2312 to ensure the hardness and brightness.To the slide part,we use the different steel mould as Thyssen Krup DIN1.2738 + Nitrided which is with wear resistant feature .the last point,we use the 1.1730 as the mould base steel.we have the enough knowledge to choose the suitable steel for you in a short time .and choose the good steel mould ,which have the good corrosion resistance ,toughness,hardness,so that saving the cycle time and cost,prolonging the mould life,shorting the maintenance rate,improving the production efficiency.

In the meanwhile ,we pay attention to all aspect,the inner side--cooling system.which is important to the bumper mould.we let the cooling water can flow balanced and the cooling effect is good enough to make the bumper have a smoothly surface.our design not only short the colling time but improve the efficiency and large reduce the cost.

We are the best and most professional mould maker in china ,come to us,the famous bumper mould maker,you will not regret,if you are interested about the bumper mould,please freely contact me .

editor: carol          Email:  sino1507@sinomould.com
MSN: sinomould-14@hotmail.com

sinomould-14